AHXAMK-W cables are medium-voltage power cables designed for dependable distribution in indoor and outdoor environments. Featuring water-tight aluminum conductors and XLPE insulation, they are suitable for installation in buildings, cable ducts, trays, underground, and in open air—including wet locations and plough cabling scenarios.
 
The cable’s construction includes a semi-conductive XLPE conductor screen, XLPE insulation, insulation screen, and a water-swellable tape. A radial water barrier of aluminum/plastic laminate is bonded to a weather-resistant black PE sheath. Each core is individually sheathed and laid around a bare earth conductor for optimized electrical performance. Rated at 18/30 kV and tested at 63 kV, these cables operate up to +90 °C (withstand +250 °C short-circuit) and support conductor sizes from 35/35 mm² to 240/70 mm².

0.00 KES

AHXAMK-W, HD 620, IEC 60502-2

Additional product information

Power cables rated voltage 18/30 kV
AHXAMK-W, HD 620, IEC 60502-2

Application Power cables for medium voltage distribution with XLPE insulation. Suitable for laying in buildings, in open air,
in ground, in cable trays and ducts where mechanical damages are not expected, in wet locations. Suitable for
plough cabling.
Construction 1. Conductor: Aluminum acc. to EN 60228 (water tight). Class 2 - RMC (stranded, round, compacted);
2. Conductor screen: Semi-conducting XLPE;
3. Insulation: XLPE;
4. Insulation screen: Semi-conducting XLPE;
5. Inner covering: Semiconducting water-swellable tape;
6. Radial water barrier: Aluminum/plastic laminate tightly attached to outer sheath;
7. Cover: Weather-resistant black color PE;
8. Assembly of cores: Individually sheathed cores are laid-up around a bare earth conductor.
Parameters
Exploitation temperature range,°C from -60 to +50
Short-circuit temperature,°C +250
Bending radius 12d
Fire properties 
Operating conductor temperature,°C max +90
Cabling (inside/outside) inside/outside
Installation temperature,°C min -20
Frequency, Hz 50
Testing voltage, kV 63
Rated Itage, kV 18/30
Cable sizes 
Number of conductors 3
Minimum conductor size, mm 35/35
Maximum conductor size, mm 240/70

info@belken-power.com